IBH LINK IoT
With the newly developed IBH Link IoT gateway and the pre-installed TeamViewer software, it is possible to access almost all PLC systems anywhere and anytime
The IBH Link IoT module, together with TeamViewer, enables easy access to controls and their programming. It is a compact device for top-hat rail mounting with four Ethernet ports and a 24V power supply. With the newly developed IBH Link IoT gateway and the pre-installed TeamViewer software, it is possible to access almost all PLC systems anywhere and anytime.
Complex modem solutions or the use of a PC on site are a thing of the past
IBH Link IoT:Startup operations
The IBH Link IoT requires a 12 - 36V DC power supply. Higher voltages may destroy the device. Pay attention to polarity.
Power supply: 24VDC / 0,2A
Configuration of the IP addresses
The administration can be made with a recent web browser over the Ethernet port 1 by using the host name http://ibhlink-iot_<serial number> (f.i. http://ibhlink-iot_000161)
or over the ports 2-4 by entering the default IP Address 192.168.1.14
On the PC the IBHNet-Iot driver is required. The Driver is available free of charge.
Default IP Address configuration:
|Management level||Port 1||Host name: ibhlink-iot_<serial number>|
|Control level||Port 2 - 4||192.168.1.14|
Network: Management Level
Network configuration for Port 1 (Management level respectively Supervision Level):
Network: Control Level
Network configuration for Port 2 - 4 (Control Level respectively Machine Level):
After logging into the TeamViewer IoT Management Console the Assigment Token can be copied:
The token must be copied into the 'Assigment Token field and assigned:
IBH Net IoT Tray
The required IBH Link IoT driver is available free of charge on our homepage: IBH Link IoT Driver
With the menu item Agents the TeamViewer connections to the IBH Link IoT can be created:
The display name can be freely chosen. The TeamViewer ID to be used for each device can be seen in the web interface:
Via the IBH Link IoT Tray the connection can now be established:
After successful connection establishment, the IBH Link IoT appears as WireGuard tunnel in the Network Adapters:
From now on, all controls that are connected via the control level of the IBH Link IoT are accessible via TeamViewer.